diff options
Diffstat (limited to 'case/case.scad')
| -rw-r--r-- | case/case.scad | 109 |
1 files changed, 56 insertions, 53 deletions
diff --git a/case/case.scad b/case/case.scad index 55f3039..44190fc 100644 --- a/case/case.scad +++ b/case/case.scad @@ -98,126 +98,129 @@ module keyboard_base_plate(pcb_width, pcb_length) { for (y = horizontal) { side([0 - pcb_clearance_edge, y, 0], - [pcb_width, width, height]); + [bottom_width, width, height]); } for (x = vertical) { side([x, 0 - pcb_clearance_edge, 0], - [width, pcb_length, height]); + [width, bottom_length, height]); } } /* Upper right corner */ - /*round_corner([thickness + pcb_clearance_edge + pcb_width, - thickness + pcb_clearance_edge + pcb_length, + round_corner([pcb_clearance_edge + thickness + pcb_width - corner_radius, + pcb_clearance_edge + thickness + pcb_length - corner_radius, -thickness/2], - [90, 90, 90]);*/ + [90, 90, 90]); /* Lower right corner */ - /*round_corner([ thickness + pcb_clearance_edge + pcb_width, - 0 - thickness - pcb_clearance_edge, - -thickness/2], - [180, 90, 90]);*/ + round_corner([ pcb_clearance_edge + thickness + pcb_width - corner_radius, + -pcb_clearance_edge - thickness + corner_radius, + -thickness/2], + [180, 90, 90]); /* Lower left corner */ - /*round_corner([0 - thickness - pcb_clearance_edge, - 0 - thickness - pcb_clearance_edge, - -thickness/2], - [-90, 90, 90]);*/ + round_corner([-pcb_clearance_edge - thickness + corner_radius, + -pcb_clearance_edge - thickness + corner_radius, + -thickness/2], + [-90, 90, 90]); /* Upper left corner */ - /*round_corner([0 - thickness - pcb_clearance_edge, - thickness + pcb_clearance_edge + pcb_length, + round_corner([-pcb_clearance_edge - thickness + corner_radius, + pcb_clearance_edge + thickness + pcb_length - corner_radius, -thickness/2], - [0, 90, 90]);*/ + [0, 90, 90]); /* Upper edge */ - /*round_edge([0 - thickness - pcb_clearance_edge, - thickness + pcb_clearance_edge + pcb_length, + round_edge([0 - thickness - pcb_clearance_edge + corner_radius, + thickness + pcb_clearance_edge + pcb_length - corner_radius, -thickness/2], [0, 90, 0], - bottom_width);*/ + bottom_width + 2 * corner_radius); /* Right edge */ - /*round_edge([ thickness + pcb_clearance_edge + pcb_width, - 0 - thickness - pcb_clearance_edge, + round_edge([ thickness + pcb_clearance_edge + pcb_width - corner_radius, + 0 - thickness - pcb_clearance_edge + corner_radius, -thickness/2], [270, 0, 0], - bottom_length);*/ + bottom_length + 2 * corner_radius); /* Lower edge */ - /*round_edge([0 - thickness - pcb_clearance_edge, - 0 - thickness - pcb_clearance_edge, + round_edge([-pcb_clearance_edge - thickness + corner_radius, + -pcb_clearance_edge - thickness + corner_radius, -thickness/2], [90, 180, 90], - bottom_width);*/ + bottom_width + 2 * corner_radius); /* Left edge */ - /*round_edge([0 - thickness - pcb_clearance_edge, - 0 - thickness - pcb_clearance_edge, + round_edge([-pcb_clearance_edge - thickness + corner_radius, + -pcb_clearance_edge - thickness + corner_radius, -thickness/2], [270, 90, 0], - bottom_length);*/ + bottom_length + 2 * corner_radius); /* Upper right wall corner */ - /*wall_corner([thickness + pcb_clearance_edge + pcb_width, - thickness + pcb_clearance_edge + pcb_length, + wall_corner([thickness + pcb_clearance_edge + pcb_width - corner_radius, + thickness + pcb_clearance_edge + pcb_length - corner_radius, -thickness/2], [0, 0, 0], corner_radius, - wall_height);*/ + wall_height); /* Lower right wall corner */ - /*wall_corner([ thickness + pcb_clearance_edge + pcb_width, - 0 - thickness - pcb_clearance_edge, + wall_corner([ thickness + pcb_clearance_edge + pcb_width - corner_radius, + 0 - thickness - pcb_clearance_edge + corner_radius, -thickness/2], [0, 0, 270], corner_radius, - wall_height);*/ + wall_height); /* Lower left wall corner */ - /*wall_corner([0 - thickness - pcb_clearance_edge, - 0 - thickness - pcb_clearance_edge, + wall_corner([0 - thickness - pcb_clearance_edge + corner_radius, + 0 - thickness - pcb_clearance_edge + corner_radius, -thickness/2], [0, 0, 180], corner_radius, - wall_height);*/ + wall_height); /* Upper left wall corner */ - /*wall_corner([0 - thickness - pcb_clearance_edge, - thickness + pcb_clearance_edge + pcb_length, - -thickness/2], + wall_corner([-pcb_clearance_edge - corner_radius, + pcb_clearance_edge + corner_radius + pcb_length, + -thickness/2], [0, 0, 90], corner_radius, - wall_height);*/ + wall_height); /* Upper wall */ - side([-pcb_clearance_edge, + side([-pcb_clearance_edge - corner_radius, pcb_clearance_edge + pcb_length, -thickness/2], - [wall_width, thickness, wall_height]); + [wall_width + 2 * corner_radius, thickness, wall_height]); /* Right wall */ side([ pcb_clearance_edge + pcb_width, - -pcb_clearance_edge, + -pcb_clearance_edge - corner_radius, -thickness/2], - [thickness, wall_length, wall_height]); + [thickness, wall_length + 2 * corner_radius, wall_height]); /* Lower wall */ - side([-pcb_clearance_edge, + side([-pcb_clearance_edge - corner_radius, -pcb_clearance_edge - thickness, -thickness/2], - [wall_width, thickness, wall_height]); + [wall_width + 2 * corner_radius, thickness, wall_height]); /* Left wall */ - side([-thickness - pcb_clearance_edge, - -pcb_clearance_edge, - -thickness/2], - [thickness, wall_length, wall_height]); + side([-pcb_clearance_edge - thickness, + -pcb_clearance_edge - corner_radius, + -thickness/2], + [thickness, wall_length + 2 * corner_radius, wall_height]); /* Bottom plate */ - side([-pcb_clearance_edge, -pcb_clearance_edge, -thickness], - [bottom_width, bottom_length, thickness]); + side([-pcb_clearance_edge - corner_radius, + -pcb_clearance_edge - corner_radius, + -thickness], + [bottom_width + 2 * corner_radius, + bottom_length + 2 * corner_radius, thickness]); /* Screw holes */ for (screw_hole = screw_holes) { |