From 6ebd07e4e1ba22bc18d573f5a132fcf8e1f1d320 Mon Sep 17 00:00:00 2001 From: XANTRONIX Development Date: Sun, 12 Nov 2023 02:47:45 -0500 Subject: Sorta scrapping things and starting over --- case/case.scad | 128 ++++++++++++++++++++++++++++++++------------------------- 1 file changed, 72 insertions(+), 56 deletions(-) diff --git a/case/case.scad b/case/case.scad index 320b876..28b7e35 100644 --- a/case/case.scad +++ b/case/case.scad @@ -9,11 +9,14 @@ module keyboard_base_plate(pcb_width, pcb_height) { pcb_screw_hole_diameter = 1.5; - thickness = 2.0; + thickness = 1.75; wall_height = 14.0; corner_radius = thickness / 2.0; - case_color = [0, 0, 0, 1.0]; + case_color = [0.5, 0.5, 0.5, 1.0]; + + bottom_width = 2 * (pcb_clearance_edge + thickness) + pcb_width; + bottom_height = 2 * (pcb_clearance_edge + thickness) + pcb_height; screw_holes = [ [ 4.8150, 85.7250], @@ -86,106 +89,119 @@ module keyboard_base_plate(pcb_width, pcb_height) { cylinder(h=h, r=d2/2.0); } } - + /* Upper right corner */ - round_corner([2 * pcb_clearance_edge + pcb_width, - 2 * pcb_clearance_edge + pcb_height, 0], [90, 90, 90]); + /*round_corner([thickness + pcb_clearance_edge + pcb_width, + thickness + pcb_clearance_edge + pcb_height, 0], + [90, 90, 90]);*/ /* Lower right corner */ - round_corner([ 2 * pcb_clearance_edge + pcb_width, - -2 * pcb_clearance_edge, 0], [180, 90, 90]); + round_corner([ thickness + pcb_clearance_edge + pcb_width, + 0 - thickness - pcb_clearance_edge, + -thickness/2], + [180, 90, 90]); /* Lower left corner */ - round_corner([-2 * pcb_clearance_edge, - -2 * pcb_clearance_edge, 0], [-90, 90, 90]); + round_corner([0 - thickness - pcb_clearance_edge, + 0 - thickness - pcb_clearance_edge, + -thickness/2], + [-90, 90, 90]); /* Upper left corner */ - round_corner([-2 * pcb_clearance_edge, - 2 * pcb_clearance_edge + pcb_height, 0], [0, 90, 90]); + round_corner([0 - thickness - pcb_clearance_edge, + thickness + pcb_clearance_edge + pcb_height, + -thickness/2], + [0, 90, 90]); /* Upper edge */ - round_edge([-2 * pcb_clearance_edge, - 2 * pcb_clearance_edge + pcb_height, 0], [0, 90, 0], - 2 * thickness + pcb_width); + round_edge([0 - thickness - pcb_clearance_edge, + thickness + pcb_clearance_edge + pcb_height, + -thickness/2], + [0, 90, 0], + bottom_width); /* Right edge */ - round_edge([ 2 * pcb_clearance_edge + pcb_width, - -2 * pcb_clearance_edge, 0], [270, 0, 0], - 2 * thickness + pcb_height); + round_edge([ thickness + pcb_clearance_edge + pcb_width, + 0 - thickness - pcb_clearance_edge, + -thickness/2], + [270, 0, 0], + bottom_height); /* Lower edge */ - round_edge([-2 * pcb_clearance_edge, - -2 * pcb_clearance_edge, 0], [90, 180, 90], - 2 * thickness + pcb_width); + round_edge([0 - thickness - pcb_clearance_edge, + 0 - thickness - pcb_clearance_edge, + -thickness/2], + [90, 180, 90], + bottom_width); /* Left edge */ - round_edge([-2 * pcb_clearance_edge, - -2 * pcb_clearance_edge, 0], [270, 90, 0], - 2 * thickness + pcb_height); + round_edge([0 - thickness - pcb_clearance_edge, + 0 - thickness - pcb_clearance_edge, + -thickness/2], + [270, 90, 0], + bottom_height); /* Upper right wall corner */ - wall_corner([2 * pcb_clearance_edge + pcb_width, - 2 * pcb_clearance_edge + pcb_height, 0], + /*wall_corner([thickness + pcb_clearance_edge + pcb_width, + thickness + pcb_clearance_edge + pcb_height, 0], [0, 0, 0], corner_radius, - wall_height); + wall_height);*/ /* Lower right wall corner */ - wall_corner([ 2 * pcb_clearance_edge + pcb_width, - -2 * pcb_clearance_edge, 0], + /*wall_corner([ thickness + pcb_clearance_edge + pcb_width, + 0 - thickness - pcb_clearance_edge, 0], [0, 0, 270], corner_radius, - wall_height); + wall_height);*/ /* Lower left wall corner */ - wall_corner([-2 * pcb_clearance_edge, - -2 * pcb_clearance_edge, 0], + /*wall_corner([0 - thickness - pcb_clearance_edge, + 0 - thickness - pcb_clearance_edge, 0], [0, 0, 180], corner_radius, - wall_height); + wall_height);*/ /* Upper left wall corner */ - wall_corner([-2 * pcb_clearance_edge, - 2 * pcb_clearance_edge + pcb_height, 0], + /*wall_corner([0 - thickness - pcb_clearance_edge, + thickness + pcb_clearance_edge + pcb_height, 0], [0, 0, 90], corner_radius, - wall_height); + wall_height);*/ /* Upper wall */ - side([-2 * pcb_clearance_edge, - pcb_clearance_edge + pcb_height, 0], - [2 * thickness + pcb_width, thickness, wall_height]); + /*side([0 - thickness - pcb_clearance_edge, + pcb_clearance_edge + pcb_height, 0], + [2 * thickness + pcb_width, thickness, wall_height]);*/ /* Right wall */ - side([ pcb_clearance_edge + pcb_width, - -2 * pcb_clearance_edge, 0], - [thickness, 2 * thickness + pcb_height, wall_height]); + /*side([ pcb_clearance_edge + pcb_width, + 0 - thickness - pcb_clearance_edge, 0], + [thickness, 2 * thickness + pcb_height, wall_height]);*/ /* Lower wall */ - side([-2 * pcb_clearance_edge, - 0 - pcb_clearance_edge - thickness, 0], - [ 2 * thickness + pcb_width, thickness, wall_height]); + /*side([0 - thickness - pcb_clearance_edge, + 0 - thickness - pcb_clearance_edge, 0], + [2 * thickness + pcb_width, thickness, wall_height]);*/ /* Left wall */ - side([ 0 - pcb_clearance_edge - thickness, - -2 * pcb_clearance_edge, 0], - [thickness, 2 * thickness + pcb_height, wall_height]); + /*side([0 - thickness - pcb_clearance_edge, + 0 - thickness - pcb_clearance_edge, 0], + [thickness, 2 * thickness + pcb_height, wall_height]);*/ /* Bottom plate */ - side([-2 * pcb_clearance_edge, - -2 * pcb_clearance_edge, - -thickness / 2], - [2 * thickness + pcb_width, - 2 * thickness + pcb_height, - thickness]); + side([0 - thickness - pcb_clearance_edge, + 0 - thickness - pcb_clearance_edge, + 0 - thickness], + [bottom_width, bottom_height, thickness]); /* Screw holes */ - for (screw_hole = screw_holes) { - screw_post([screw_hole[0], screw_hole[1], thickness], + /*for (screw_hole = screw_holes) { + screw_post([screw_hole[0], screw_hole[1], 0], pcb_clearance_bottom * 2, pcb_screw_hole_diameter * 2, pcb_screw_hole_diameter); - } + }*/ } keyboard_base_plate(pcb_width, pcb_height); -- cgit v1.2.3