From 71d2413f0e9f14e2bccff6389596d6a892d021f4 Mon Sep 17 00:00:00 2001
From: XANTRONIX Development
Date: Wed, 15 Nov 2023 13:03:23 -0500
Subject: Make usage of keyboard.scad

---
 case/compact.scad | 26 ++++----------------------
 case/top.scad     | 39 +++++++++------------------------------
 2 files changed, 13 insertions(+), 52 deletions(-)

diff --git a/case/compact.scad b/case/compact.scad
index 870d446..347cca1 100644
--- a/case/compact.scad
+++ b/case/compact.scad
@@ -1,24 +1,6 @@
 $fn = 72;
 
-pcb_width  = 257.175;
-pcb_length =  95.250;
-pcb_height =   1.600;
-
-pcb_screw_holes = [
-    [  4.7625, 85.7250],
-    [ 66.6750, 85.7250],
-    [161.9250, 85.7250],
-    [238.1250, 85.7250],
-    [ 61.9125, 47.6250],
-    [138.1125, 47.6250],
-    [214.3125, 47.6250],
-    [ 20.2406,  9.5250],
-    [123.8250,  9.5250],
-    [238.1250,  9.5250]
-];
-
-switch_leg_length =  3.30;
-switch_height     = 11.10;
+include <keyboard.scad>
 
 module keyboard_base_plate(pcb_dimensions, pcb_screw_holes, switch_z_range) {
     pcb_width  = pcb_dimensions[0];
@@ -242,6 +224,6 @@ module keyboard_base_plate(pcb_dimensions, pcb_screw_holes, switch_z_range) {
     ridges(thickness * 2, pcb_clearance_bottom / 2);
 }
 
-keyboard_base_plate([pcb_width, pcb_length, pcb_height],
-                    pcb_screw_holes,
-                    [-switch_leg_length, switch_height]);
+keyboard_base_plate([keyboard_pcb_width, keyboard_pcb_length, keyboard_pcb_height],
+                    keyboard_pcb_screw_holes,
+                    [-keyboard_switch_leg_length, keyboard_switch_height]);
diff --git a/case/top.scad b/case/top.scad
index cac8696..337c4ca 100644
--- a/case/top.scad
+++ b/case/top.scad
@@ -1,5 +1,7 @@
 $fn = 72;
 
+include <keyboard.scad>
+
 /*
  * Top screw holes are 15mm from top of case
  * Side screws are 6.5mm from side of case
@@ -16,30 +18,6 @@ $fn = 72;
  * First vertical ridge Y offset: 8mm
  */
 
-key_switch_height = 11.10;
-key_switch_sizes  = [
-    [0.5,  1.0,  1.0,  1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0],
-    [1.0,  1.0,  1.0,  1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 0.5],
-    [1.25, 1.0,  1.0,  1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.25],
-    [1.75, 1.0,  1.0,  1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.75],
-    [1.0,  1.25, 1.25, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0]
-];
-
-pcb_height      =  1.600;
-pcb_screw_holes = [
-    [  4.7625, 85.7250],
-    [ 66.6750, 85.7250],
-    [161.9250, 85.7250],
-    [238.1250, 85.7250],
-    [ 61.9125, 47.6250],
-    [138.1125, 47.6250],
-    [214.3125, 47.6250],
-    [ 20.2406,  9.5250],
-    [123.8250,  9.5250],
-    [238.1250,  9.5250]
-];
-
-
 module top_case(key_switch_sizes, pcb_screw_holes) {
     case_width_top     = 317.5000;
     case_width_bottom  = 320.0000;
@@ -166,19 +144,19 @@ module top_case(key_switch_sizes, pcb_screw_holes) {
         module walls() {
             /* Upper */
             translate([-wall_width, keyboard_length, 0])
-            cube([keyboard_width + 2 * wall_width, wall_width, key_switch_height], false);
+            cube([keyboard_width + 2 * wall_width, wall_width, keyboard_switch_height], false);
 
             /* Right */
             translate([keyboard_width, -wall_width, 0])
-            cube([wall_width, keyboard_length + 2 * wall_width, key_switch_height], false);
+            cube([wall_width, keyboard_length + 2 * wall_width, keyboard_switch_height], false);
 
             /* Lower */
             translate([-wall_width, -wall_width, 0])
-            cube([keyboard_width + 2 * wall_width, wall_width, key_switch_height], false);
+            cube([keyboard_width + 2 * wall_width, wall_width, keyboard_switch_height], false);
 
             /* Left */
             translate([-wall_width, -wall_width, 0])
-            cube([wall_width, keyboard_length + 2 * wall_width, key_switch_height], false);
+            cube([wall_width, keyboard_length + 2 * wall_width, keyboard_switch_height], false);
         }
 
         module body() {
@@ -217,10 +195,11 @@ module top_case(key_switch_sizes, pcb_screw_holes) {
         fin_gaps();
     }
 
-    keyboard_deck_z_offset = wall_height - wall_width - key_switch_height;
+    keyboard_deck_z_offset = wall_height - wall_width - keyboard_switch_height;
 
     translate([keyboard_x_offset, keyboard_y_offset, keyboard_deck_z_offset])
     keyboard_deck();
 }
 
-top_case(key_switch_sizes, pcb_screw_holes);
+top_case(keyboard_switch_sizes,
+         keyboard_pcb_screw_holes);
-- 
cgit v1.2.3