From 779137f5450fc5206beebeeaf34284db333dc1ac Mon Sep 17 00:00:00 2001
From: XANTRONIX Development
Date: Sat, 11 Nov 2023 20:55:34 -0500
Subject: Move screw holes into thing

---
 case/case.scad | 48 ++++++++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/case/case.scad b/case/case.scad
index 04241a9..9dc8c81 100644
--- a/case/case.scad
+++ b/case/case.scad
@@ -3,29 +3,7 @@ $fn = 72;
 pcb_width  = 257.175;
 pcb_height =  95.250;
 
-screw_holes = [
-    [  4.8150, 85.6188],
-    [ 47.4822, 85.6188],
-    [ 85.8150, 85.6188],
-    [123,8150, 85.6188],
-    [161.8150, 85.6188],
-    [199.8150, 85.6188],
-    [251.3150, 67.1188],
-    [ 22.5650, 47.6187],
-    [118.8150, 47.6187],
-    [157.3150, 47.6187],
-    [  4.7500, 28.7500],
-    [ 29.7500, 28.7500],
-    [227.8150, 28.7500],
-    [251.8150, 28.7500],
-    [ 42.8150,  9.1188],
-    [ 85.8150,  9.1188],
-    [123.8150,  9.1188],
-    [161.8150,  9.1188],
-    [200.3150,  9.1188]
-];
- 
-module keyboard_base_plate(pcb_width, pcb_height, screw_holes=[]) {
+module keyboard_base_plate(pcb_width, pcb_height) {
     pcb_clearance_edge   = 1.0;
     pcb_clearance_bottom = 2.0;
     
@@ -35,6 +13,28 @@ module keyboard_base_plate(pcb_width, pcb_height, screw_holes=[]) {
     wall_height   = 14.0;
     corner_radius = thickness / 2.0;
 
+    screw_holes = [
+        [  4.8150, 85.6188],
+        [ 47.4822, 85.6188],
+        [ 85.8150, 85.6188],
+        [123,8150, 85.6188],
+        [161.8150, 85.6188],
+        [199.8150, 85.6188],
+        [251.3150, 67.1188],
+        [ 22.5650, 47.6187],
+        [118.8150, 47.6187],
+        [157.3150, 47.6187],
+        [  4.7500, 28.7500],
+        [ 29.7500, 28.7500],
+        [227.8150, 28.7500],
+        [251.8150, 28.7500],
+        [ 42.8150,  9.1188],
+        [ 85.8150,  9.1188],
+        [123.8150,  9.1188],
+        [161.8150,  9.1188],
+        [200.3150,  9.1188]
+    ];
+
     module round_corner(translation, rotation) {
         translate(translation)
         rotate(rotation)
@@ -181,4 +181,4 @@ module keyboard_base_plate(pcb_width, pcb_height, screw_holes=[]) {
     }
 }
 
-keyboard_base_plate(pcb_width, pcb_height, screw_holes);
+keyboard_base_plate(pcb_width, pcb_height);
-- 
cgit v1.2.3