From a014766104ac3939a9abc876578ca8aceb0a7f58 Mon Sep 17 00:00:00 2001
From: XANTRONIX Development
Date: Sun, 12 Nov 2023 21:13:58 -0500
Subject: Fix naming collision

---
 case/case.scad | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/case/case.scad b/case/case.scad
index 438a50a..30ae811 100644
--- a/case/case.scad
+++ b/case/case.scad
@@ -1,9 +1,9 @@
 $fn = 72;
 
 pcb_width  = 257.175;
-pcb_height =  95.250;
+pcb_length =  95.250;
 
-module keyboard_base_plate(pcb_width, pcb_height) {
+module keyboard_base_plate(pcb_width, pcb_length) {
     pcb_clearance_edge   = 1.0;
     pcb_clearance_bottom = 2.0;
     
@@ -16,7 +16,7 @@ module keyboard_base_plate(pcb_width, pcb_height) {
     case_color = [0.5, 0.5, 0.5, 1.0];
 
     bottom_width  = 2 * (pcb_clearance_edge + thickness) + pcb_width;
-    bottom_height = 2 * (pcb_clearance_edge + thickness) + pcb_height;
+    bottom_length = 2 * (pcb_clearance_edge + thickness) + pcb_length;
 
     screw_holes = [
         [  4.8150, 85.7250],
@@ -83,8 +83,8 @@ module keyboard_base_plate(pcb_width, pcb_height) {
     
     module ridges() {
         horizontal = [
-            (bottom_height / 3),
-            (bottom_height / 3) * 2
+            (bottom_length / 3),
+            (bottom_length / 3) * 2
         ];
         
         vertical = [
@@ -100,13 +100,13 @@ module keyboard_base_plate(pcb_width, pcb_height) {
         
         for (x = vertical) {
             side([x, 0 - pcb_clearance_edge, 0],
-                 [thickness * 2, pcb_height, pcb_clearance_edge]);
+                 [thickness * 2, pcb_length, pcb_clearance_edge]);
         }
     }
     
     /* Upper right corner */
     round_corner([thickness + pcb_clearance_edge + pcb_width,
-                  thickness + pcb_clearance_edge + pcb_height,
+                  thickness + pcb_clearance_edge + pcb_length,
                  -thickness/2],
                  [90, 90, 90]);
 
@@ -124,13 +124,13 @@ module keyboard_base_plate(pcb_width, pcb_height) {
 
     /* Upper left corner */
     round_corner([0 - thickness - pcb_clearance_edge,
-                      thickness + pcb_clearance_edge + pcb_height,
+                      thickness + pcb_clearance_edge + pcb_length,
                      -thickness/2],
                  [0, 90, 90]);
 
     /* Upper edge */
     round_edge([0 - thickness - pcb_clearance_edge,
-                    thickness + pcb_clearance_edge + pcb_height,
+                    thickness + pcb_clearance_edge + pcb_length,
                    -thickness/2],
                [0, 90, 0],
                bottom_width);
@@ -140,7 +140,7 @@ module keyboard_base_plate(pcb_width, pcb_height) {
                 0 - thickness - pcb_clearance_edge,
                     -thickness/2],
                [270, 0, 0],
-               bottom_height);
+               bottom_length);
          
     /* Lower edge */
     round_edge([0 - thickness - pcb_clearance_edge,
@@ -154,11 +154,11 @@ module keyboard_base_plate(pcb_width, pcb_height) {
                 0 - thickness - pcb_clearance_edge,
                    -thickness/2],
                [270, 90, 0],
-               bottom_height);
+               bottom_length);
 
     /* Upper right wall corner */
     wall_corner([thickness + pcb_clearance_edge + pcb_width,
-                 thickness + pcb_clearance_edge + pcb_height,
+                 thickness + pcb_clearance_edge + pcb_length,
                 -thickness/2],
                 [0, 0, 0],
                 corner_radius,
@@ -182,7 +182,7 @@ module keyboard_base_plate(pcb_width, pcb_height) {
                 
     /* Upper left wall corner */
     wall_corner([0 - thickness - pcb_clearance_edge,
-                     thickness + pcb_clearance_edge + pcb_height,
+                     thickness + pcb_clearance_edge + pcb_length,
                     -thickness/2],
                 [0, 0, 90],
                 corner_radius,
@@ -190,7 +190,7 @@ module keyboard_base_plate(pcb_width, pcb_height) {
  
     /* Upper wall */
     side([0 - thickness - pcb_clearance_edge,
-                          pcb_clearance_edge + pcb_height + corner_radius,
+                          pcb_clearance_edge + pcb_length + corner_radius,
              -thickness/2],
          [bottom_width, thickness, wall_height]);
           
@@ -198,7 +198,7 @@ module keyboard_base_plate(pcb_width, pcb_height) {
     side([pcb_clearance_edge + pcb_width + corner_radius,
           0 - thickness - pcb_clearance_edge,
              -thickness/2],
-         [thickness, bottom_height, wall_height]);
+         [thickness, bottom_length, wall_height]);
           
     /* Lower wall */
     side([0 - thickness - pcb_clearance_edge,
@@ -210,13 +210,13 @@ module keyboard_base_plate(pcb_width, pcb_height) {
     side([0 - thickness - pcb_clearance_edge - corner_radius,
           0 - thickness - pcb_clearance_edge,
              -thickness/2],
-         [thickness, bottom_height, wall_height]);
+         [thickness, bottom_length, wall_height]);
 
     /* Bottom plate */
     side([0 - thickness - pcb_clearance_edge,
           0 - thickness - pcb_clearance_edge,
           0 - thickness],
-         [bottom_width, bottom_height, thickness]);
+         [bottom_width, bottom_length, thickness]);
           
     /* Screw holes */
     for (screw_hole = screw_holes) {
@@ -229,4 +229,4 @@ module keyboard_base_plate(pcb_width, pcb_height) {
     ridges();
 }
 
-keyboard_base_plate(pcb_width, pcb_height);
+keyboard_base_plate(pcb_width, pcb_length);
-- 
cgit v1.2.3