From 109008dd6fd40a9a4c728c6f3e1dcd4d4f269285 Mon Sep 17 00:00:00 2001
From: XANTRONIX Development
Date: Sun, 12 Nov 2023 21:33:04 -0500
Subject: A bit more sane

---
 case/case.scad | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'case')

diff --git a/case/case.scad b/case/case.scad
index 769387a..7faa804 100644
--- a/case/case.scad
+++ b/case/case.scad
@@ -10,11 +10,14 @@ module keyboard_base_plate(pcb_width, pcb_length) {
     pcb_screw_hole_diameter = 1.5;
     
     thickness     = 1.75;
-    wall_height   = 14.0;
     corner_radius = thickness / 2.0;
 
     case_color = [0.5, 0.5, 0.5, 1.0];
 
+    wall_width  = pcb_width  + 2 * pcb_clearance_edge;
+    wall_length = pcb_length + 2 * pcb_clearance_edge;
+    wall_height   = 14.0;
+
     bottom_width  = 2 * (pcb_clearance_edge + thickness) + pcb_width;
     bottom_length = 2 * (pcb_clearance_edge + thickness) + pcb_length;
 
@@ -191,25 +194,25 @@ module keyboard_base_plate(pcb_width, pcb_length) {
     side([0 - thickness - pcb_clearance_edge,
                           pcb_clearance_edge + pcb_length + corner_radius,
              -thickness/2],
-         [bottom_width, thickness, wall_height]);
+         [wall_width, thickness, wall_height]);
           
     /* Right wall */
     side([pcb_clearance_edge + pcb_width + corner_radius,
           0 - thickness - pcb_clearance_edge,
              -thickness/2],
-         [thickness, bottom_length, wall_height]);
+         [thickness, wall_length, wall_height]);
           
     /* Lower wall */
     side([0 - thickness - pcb_clearance_edge,
           0 - thickness - pcb_clearance_edge - corner_radius,
              -thickness/2],
-         [bottom_width, thickness, wall_height]);
+         [wall_width, thickness, wall_height]);
           
     /* Left wall */
     side([0 - thickness - pcb_clearance_edge - corner_radius,
           0 - thickness - pcb_clearance_edge,
              -thickness/2],
-         [thickness, bottom_length, wall_height]);
+         [thickness, wall_length, wall_height]);
 
     /* Bottom plate */
     side([0 - thickness - pcb_clearance_edge,
-- 
cgit v1.2.3