From f726a5e46f996e66a26d8f2e2c0b9d792835b921 Mon Sep 17 00:00:00 2001
From: XANTRONIX Development
Date: Sat, 11 Nov 2023 21:09:03 -0500
Subject: Make bolt holes line up with key switches

---
 case/case.scad | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

(limited to 'case')

diff --git a/case/case.scad b/case/case.scad
index 9dc8c81..5c7def2 100644
--- a/case/case.scad
+++ b/case/case.scad
@@ -14,25 +14,25 @@ module keyboard_base_plate(pcb_width, pcb_height) {
     corner_radius = thickness / 2.0;
 
     screw_holes = [
-        [  4.8150, 85.6188],
-        [ 47.4822, 85.6188],
-        [ 85.8150, 85.6188],
-        [123,8150, 85.6188],
-        [161.8150, 85.6188],
-        [199.8150, 85.6188],
-        [251.3150, 67.1188],
-        [ 22.5650, 47.6187],
-        [118.8150, 47.6187],
-        [157.3150, 47.6187],
-        [  4.7500, 28.7500],
-        [ 29.7500, 28.7500],
-        [227.8150, 28.7500],
-        [251.8150, 28.7500],
-        [ 42.8150,  9.1188],
-        [ 85.8150,  9.1188],
-        [123.8150,  9.1188],
-        [161.8150,  9.1188],
-        [200.3150,  9.1188]
+        [  4.8150, 85.7250],
+        [ 47.4822, 85.7250],
+        [ 85.8150, 85.7250],
+        [123,8150, 85.7250],
+        [161.8150, 85.7250],
+        [199.8150, 85.7250],
+        [251.3150, 66.6750],
+        [ 22.5650, 47.6250],
+        [118.8150, 47.6250],
+        [157.3150, 47.6250],
+        [  4.7500, 28.5750],
+        [ 29.7500, 28.5750],
+        [227.8150, 28.5750],
+        [251.8150, 28.5750],
+        [ 42.8150,  9.5250],
+        [ 85.8150,  9.5250],
+        [123.8150,  9.5250],
+        [161.8150,  9.5250],
+        [200.3150,  9.5250]
     ];
 
     module round_corner(translation, rotation) {
@@ -175,7 +175,7 @@ module keyboard_base_plate(pcb_width, pcb_height) {
     /* Screw holes */
     for (screw_hole = screw_holes) {
         screw_post([screw_hole[0], screw_hole[1], thickness],
-                   pcb_clearance_bottom,
+                   pcb_clearance_bottom * 2,
                    pcb_screw_hole_diameter * 2,
                    pcb_screw_hole_diameter);
     }
-- 
cgit v1.2.3