From fae3345e24bcae1ddfb64b045ae3b9d7edf81dc3 Mon Sep 17 00:00:00 2001
From: XANTRONIX Development
Date: Tue, 14 Nov 2023 12:23:18 -0500
Subject: Rename case.scad to compact.scad

---
 case/case.scad    | 247 ------------------------------------------------------
 case/compact.scad | 247 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 247 insertions(+), 247 deletions(-)
 delete mode 100644 case/case.scad
 create mode 100644 case/compact.scad

(limited to 'case')

diff --git a/case/case.scad b/case/case.scad
deleted file mode 100644
index 318827f..0000000
--- a/case/case.scad
+++ /dev/null
@@ -1,247 +0,0 @@
-$fn = 72;
-
-pcb_width  = 257.175;
-pcb_length =  95.250;
-pcb_height =   1.600;
-
-pcb_screw_holes = [
-    [  4.7625, 85.7250],
-    [ 66.6750, 85.7250],
-    [161.9250, 85.7250],
-    [238.1250, 85.7250],
-    [ 61.9125, 47.6250],
-    [138.1125, 47.6250],
-    [214.3125, 47.6250],
-    [ 19.0500,  9.5250],
-    [123.8250,  9.5250],
-    [238.1250,  9.5250]
-];
-
-switch_leg_length =  3.30;
-switch_height     = 11.10;
-
-module keyboard_base_plate(pcb_dimensions, pcb_screw_holes, switch_z_range) {
-    pcb_width  = pcb_dimensions[0];
-    pcb_length = pcb_dimensions[1];
-    pcb_height = pcb_dimensions[2];
-
-    switch_z_min = switch_z_range[0];
-    switch_z_max = switch_z_range[1];
-
-    pcb_clearance_edge   = 1.0;
-    pcb_clearance_bottom = -switch_z_min - pcb_height + 0.5;
-
-    pcb_screw_diameter      = 1.5;
-    pcb_screw_hole_diameter = 1.5;
-    pcb_screw_height        = 3.0;
-
-    thickness     = 1.75;
-    corner_radius = 0.2;
-
-    case_color = [0.5, 0.5, 0.5, 1.0];
-
-    wall_width  = pcb_width  + 2 * (pcb_clearance_edge + thickness) - 2 * corner_radius;
-    wall_length = pcb_length + 2 * (pcb_clearance_edge + thickness) - 2 * corner_radius;
-    wall_height = pcb_screw_height + pcb_height + switch_z_max;
-
-    bottom_width  = 2 * (pcb_clearance_edge) + pcb_width;
-    bottom_length = 2 * (pcb_clearance_edge) + pcb_length;
-    bottom_height = thickness;
-
-    module round_corner(rotation) {
-        color(case_color)
-        rotate(rotation)
-        rotate_extrude(angle=90) {
-            intersection() {
-                circle(r=corner_radius);
-                square(corner_radius*2);
-            }
-        }
-    }
-
-    module round_edge(rotation, length) {
-        color(case_color)
-        rotate(rotation)
-        linear_extrude(length)
-        intersection() {
-            circle(r=corner_radius);
-            square(corner_radius*2);
-        }
-    }
-
-    module panel(dimensions) {
-        color(case_color)
-        linear_extrude(dimensions[2])
-        square([dimensions[0], dimensions[1]], false);
-    }
-
-    module wall_corner(rotation, radius, length) {
-        color(case_color)
-        rotate(rotation)
-        linear_extrude(length)
-        intersection() {
-            circle(r=radius);
-            square([radius, radius], false);
-        }
-    }
-
-    module screw_post(h, d) {
-        diameter_outer = 3 * d;
-        diameter_inner =     d;
-
-        color(case_color)
-        difference() {
-            cylinder(h=h, r1 = (diameter_outer / 2.0) * 1.5);
-            cylinder(h=h, r  =  diameter_inner / 2.0);
-        }
-    }
-
-    module ridges(width, height) {
-        horizontal = [
-            (bottom_length / 3),
-            (bottom_length / 3) * 2
-        ];
-
-        vertical = [
-            (bottom_width / 3),
-            (bottom_width / 3) * 2
-        ];
-
-        for (y = horizontal) {
-            translate([0 - pcb_clearance_edge, y, 0])
-            panel([bottom_width, width, height]);
-        }
-
-        for (x = vertical) {
-            translate([x, 0 - pcb_clearance_edge, 0])
-            panel([width, bottom_length, height]);
-        }
-    }
-
-    /* Upper wall */
-
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-                pcb_clearance_edge + pcb_length,
-               -thickness + corner_radius])
-    panel([wall_width, thickness, wall_height + thickness - corner_radius]);
-
-    /* Right wall */
-    translate([ pcb_clearance_edge + pcb_width,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness + corner_radius])
-    panel([thickness, wall_length, wall_height + thickness - corner_radius]);
-
-    /* Lower wall */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-               -pcb_clearance_edge - thickness,
-               -thickness + corner_radius])
-    panel([wall_width, thickness, wall_height + thickness - corner_radius]);
-
-    /* Left wall */
-    translate([-pcb_clearance_edge - thickness,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness + corner_radius])
-    panel([thickness, wall_length, wall_height + thickness - corner_radius]);
-
-    /* Upper right wall corner */
-    translate([pcb_clearance_edge + thickness + pcb_width - corner_radius,
-               pcb_clearance_edge + thickness + pcb_length - corner_radius,
-              -thickness + corner_radius])
-    wall_corner([0, 0, 0],
-                corner_radius,
-                wall_height + thickness - corner_radius);
-
-    /* Lower right wall corner */
-    translate([ pcb_clearance_edge + thickness + pcb_width - corner_radius,
-                 -pcb_clearance_edge - thickness + corner_radius,
-                 -thickness + corner_radius])
-    wall_corner([0, 0, 270],
-                corner_radius,
-                wall_height + thickness - corner_radius);
-
-    /* Lower left wall corner */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness + corner_radius])
-    wall_corner([0, 0, 180],
-                corner_radius,
-                wall_height + thickness - corner_radius);
-
-    /* Upper left wall corner */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-                pcb_clearance_edge + pcb_length + thickness - corner_radius,
-               -thickness + corner_radius])
-    wall_corner([0, 0, 90],
-                corner_radius,
-                wall_height + thickness - corner_radius);
-
-    /* Bottom plate */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness])
-    panel([bottom_width  + 2 * thickness - 2 * corner_radius,
-           bottom_length + 2 * thickness - 2 * corner_radius,
-           thickness]);
-
-    /* Upper edge */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-                pcb_clearance_edge + thickness + pcb_length - corner_radius,
-               -thickness + corner_radius])
-    round_edge([0, 90, 0], wall_width);
-
-    /* Right edge */
-    translate([ pcb_clearance_edge  + thickness + pcb_width - corner_radius,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness + corner_radius])
-    round_edge([270, 0, 0], wall_length);
-
-    /* Lower edge */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness + corner_radius])
-    round_edge([90, 180, 90], wall_width);
-
-    /* Left edge */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness + corner_radius])
-    round_edge([270, 90, 0], wall_length);
-
-    /* Upper right corner */
-    translate([pcb_clearance_edge + thickness + pcb_width - corner_radius,
-               pcb_clearance_edge + thickness + pcb_length - corner_radius,
-              -thickness + corner_radius])
-    round_corner([90, 90, 90]);
-
-    /* Lower right corner */
-    translate([ pcb_clearance_edge + thickness + pcb_width - corner_radius,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness + corner_radius])
-    round_corner([180, 90, 90]);
-
-    /* Lower left corner */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-               -pcb_clearance_edge - thickness + corner_radius,
-               -thickness + corner_radius])
-    round_corner([-90, 90, 90]);
-
-    /* Upper left corner */
-    translate([-pcb_clearance_edge - thickness + corner_radius,
-                pcb_clearance_edge + thickness + pcb_length - corner_radius,
-               -thickness + corner_radius])
-    round_corner([0, 90, 90]);
-
-    /* Screw holes */
-    for (screw_hole = pcb_screw_holes) {
-        translate([screw_hole[0], screw_hole[1], 0])
-        screw_post(pcb_screw_height,
-                   pcb_screw_diameter);
-    }
-
-    /* Ridges (for rigidity!) */
-    ridges(thickness * 2, pcb_clearance_bottom / 2);
-}
-
-keyboard_base_plate([pcb_width, pcb_length, pcb_height],
-                    pcb_screw_holes,
-                    [-switch_leg_length, switch_height]);
diff --git a/case/compact.scad b/case/compact.scad
new file mode 100644
index 0000000..318827f
--- /dev/null
+++ b/case/compact.scad
@@ -0,0 +1,247 @@
+$fn = 72;
+
+pcb_width  = 257.175;
+pcb_length =  95.250;
+pcb_height =   1.600;
+
+pcb_screw_holes = [
+    [  4.7625, 85.7250],
+    [ 66.6750, 85.7250],
+    [161.9250, 85.7250],
+    [238.1250, 85.7250],
+    [ 61.9125, 47.6250],
+    [138.1125, 47.6250],
+    [214.3125, 47.6250],
+    [ 19.0500,  9.5250],
+    [123.8250,  9.5250],
+    [238.1250,  9.5250]
+];
+
+switch_leg_length =  3.30;
+switch_height     = 11.10;
+
+module keyboard_base_plate(pcb_dimensions, pcb_screw_holes, switch_z_range) {
+    pcb_width  = pcb_dimensions[0];
+    pcb_length = pcb_dimensions[1];
+    pcb_height = pcb_dimensions[2];
+
+    switch_z_min = switch_z_range[0];
+    switch_z_max = switch_z_range[1];
+
+    pcb_clearance_edge   = 1.0;
+    pcb_clearance_bottom = -switch_z_min - pcb_height + 0.5;
+
+    pcb_screw_diameter      = 1.5;
+    pcb_screw_hole_diameter = 1.5;
+    pcb_screw_height        = 3.0;
+
+    thickness     = 1.75;
+    corner_radius = 0.2;
+
+    case_color = [0.5, 0.5, 0.5, 1.0];
+
+    wall_width  = pcb_width  + 2 * (pcb_clearance_edge + thickness) - 2 * corner_radius;
+    wall_length = pcb_length + 2 * (pcb_clearance_edge + thickness) - 2 * corner_radius;
+    wall_height = pcb_screw_height + pcb_height + switch_z_max;
+
+    bottom_width  = 2 * (pcb_clearance_edge) + pcb_width;
+    bottom_length = 2 * (pcb_clearance_edge) + pcb_length;
+    bottom_height = thickness;
+
+    module round_corner(rotation) {
+        color(case_color)
+        rotate(rotation)
+        rotate_extrude(angle=90) {
+            intersection() {
+                circle(r=corner_radius);
+                square(corner_radius*2);
+            }
+        }
+    }
+
+    module round_edge(rotation, length) {
+        color(case_color)
+        rotate(rotation)
+        linear_extrude(length)
+        intersection() {
+            circle(r=corner_radius);
+            square(corner_radius*2);
+        }
+    }
+
+    module panel(dimensions) {
+        color(case_color)
+        linear_extrude(dimensions[2])
+        square([dimensions[0], dimensions[1]], false);
+    }
+
+    module wall_corner(rotation, radius, length) {
+        color(case_color)
+        rotate(rotation)
+        linear_extrude(length)
+        intersection() {
+            circle(r=radius);
+            square([radius, radius], false);
+        }
+    }
+
+    module screw_post(h, d) {
+        diameter_outer = 3 * d;
+        diameter_inner =     d;
+
+        color(case_color)
+        difference() {
+            cylinder(h=h, r1 = (diameter_outer / 2.0) * 1.5);
+            cylinder(h=h, r  =  diameter_inner / 2.0);
+        }
+    }
+
+    module ridges(width, height) {
+        horizontal = [
+            (bottom_length / 3),
+            (bottom_length / 3) * 2
+        ];
+
+        vertical = [
+            (bottom_width / 3),
+            (bottom_width / 3) * 2
+        ];
+
+        for (y = horizontal) {
+            translate([0 - pcb_clearance_edge, y, 0])
+            panel([bottom_width, width, height]);
+        }
+
+        for (x = vertical) {
+            translate([x, 0 - pcb_clearance_edge, 0])
+            panel([width, bottom_length, height]);
+        }
+    }
+
+    /* Upper wall */
+
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+                pcb_clearance_edge + pcb_length,
+               -thickness + corner_radius])
+    panel([wall_width, thickness, wall_height + thickness - corner_radius]);
+
+    /* Right wall */
+    translate([ pcb_clearance_edge + pcb_width,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness + corner_radius])
+    panel([thickness, wall_length, wall_height + thickness - corner_radius]);
+
+    /* Lower wall */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+               -pcb_clearance_edge - thickness,
+               -thickness + corner_radius])
+    panel([wall_width, thickness, wall_height + thickness - corner_radius]);
+
+    /* Left wall */
+    translate([-pcb_clearance_edge - thickness,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness + corner_radius])
+    panel([thickness, wall_length, wall_height + thickness - corner_radius]);
+
+    /* Upper right wall corner */
+    translate([pcb_clearance_edge + thickness + pcb_width - corner_radius,
+               pcb_clearance_edge + thickness + pcb_length - corner_radius,
+              -thickness + corner_radius])
+    wall_corner([0, 0, 0],
+                corner_radius,
+                wall_height + thickness - corner_radius);
+
+    /* Lower right wall corner */
+    translate([ pcb_clearance_edge + thickness + pcb_width - corner_radius,
+                 -pcb_clearance_edge - thickness + corner_radius,
+                 -thickness + corner_radius])
+    wall_corner([0, 0, 270],
+                corner_radius,
+                wall_height + thickness - corner_radius);
+
+    /* Lower left wall corner */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness + corner_radius])
+    wall_corner([0, 0, 180],
+                corner_radius,
+                wall_height + thickness - corner_radius);
+
+    /* Upper left wall corner */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+                pcb_clearance_edge + pcb_length + thickness - corner_radius,
+               -thickness + corner_radius])
+    wall_corner([0, 0, 90],
+                corner_radius,
+                wall_height + thickness - corner_radius);
+
+    /* Bottom plate */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness])
+    panel([bottom_width  + 2 * thickness - 2 * corner_radius,
+           bottom_length + 2 * thickness - 2 * corner_radius,
+           thickness]);
+
+    /* Upper edge */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+                pcb_clearance_edge + thickness + pcb_length - corner_radius,
+               -thickness + corner_radius])
+    round_edge([0, 90, 0], wall_width);
+
+    /* Right edge */
+    translate([ pcb_clearance_edge  + thickness + pcb_width - corner_radius,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness + corner_radius])
+    round_edge([270, 0, 0], wall_length);
+
+    /* Lower edge */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness + corner_radius])
+    round_edge([90, 180, 90], wall_width);
+
+    /* Left edge */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness + corner_radius])
+    round_edge([270, 90, 0], wall_length);
+
+    /* Upper right corner */
+    translate([pcb_clearance_edge + thickness + pcb_width - corner_radius,
+               pcb_clearance_edge + thickness + pcb_length - corner_radius,
+              -thickness + corner_radius])
+    round_corner([90, 90, 90]);
+
+    /* Lower right corner */
+    translate([ pcb_clearance_edge + thickness + pcb_width - corner_radius,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness + corner_radius])
+    round_corner([180, 90, 90]);
+
+    /* Lower left corner */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+               -pcb_clearance_edge - thickness + corner_radius,
+               -thickness + corner_radius])
+    round_corner([-90, 90, 90]);
+
+    /* Upper left corner */
+    translate([-pcb_clearance_edge - thickness + corner_radius,
+                pcb_clearance_edge + thickness + pcb_length - corner_radius,
+               -thickness + corner_radius])
+    round_corner([0, 90, 90]);
+
+    /* Screw holes */
+    for (screw_hole = pcb_screw_holes) {
+        translate([screw_hole[0], screw_hole[1], 0])
+        screw_post(pcb_screw_height,
+                   pcb_screw_diameter);
+    }
+
+    /* Ridges (for rigidity!) */
+    ridges(thickness * 2, pcb_clearance_bottom / 2);
+}
+
+keyboard_base_plate([pcb_width, pcb_length, pcb_height],
+                    pcb_screw_holes,
+                    [-switch_leg_length, switch_height]);
-- 
cgit v1.2.3