Don't need explicit false on cube() center arg

2 files changed, 18 insertions, 18 deletions

diff --git a/case/keyboard.scad b/case/keyboard.scad
index e9dbde0..8e04cd6 100644
--- a/case/keyboard.scad
+++ b/case/keyboard.scad
@@ -60,7 +60,7 @@ module keyboard_deck(wall_width) {
         if (key_switch_size <= 0.5) {
             cube([keyboard_switch_width  * key_switch_size,
                     keyboard_switch_length,
-                    wall_width], false);
+                    wall_width]);
         } else {
             hole_width  = key_switch_footprint[0];
             hole_length = key_switch_footprint[1];
@@ -69,10 +69,10 @@ module keyboard_deck(wall_width) {
             hole_y = plate_length / 2 - hole_length / 2;
 
             difference() {
-                cube([plate_width + eps, plate_length + eps, wall_width], false);
+                cube([plate_width + eps, plate_length + eps, wall_width]);
 
                 translate([hole_x, hole_y, -eps])
-                cube([hole_width, hole_length, wall_width + 2*eps], false);
+                cube([hole_width, hole_length, wall_width + 2*eps]);
             }
         }
     }
@@ -82,19 +82,19 @@ module keyboard_deck(wall_width) {
 
         /* Upper */
         translate([-wall_width, keyboard_pcb_length, 0])
-        cube([keyboard_pcb_width + 2 * wall_width, wall_width, wall_height + eps], false);
+        cube([keyboard_pcb_width + 2 * wall_width, wall_width, wall_height + eps]);
 
         /* Right */
         translate([keyboard_pcb_width, -wall_width, 0])
-        cube([wall_width, keyboard_pcb_length + 2 * wall_width, wall_height + eps], false);
+        cube([wall_width, keyboard_pcb_length + 2 * wall_width, wall_height + eps]);
 
         /* Lower */
         translate([-wall_width, -wall_width, 0])
-        cube([keyboard_pcb_width + 2 * wall_width, wall_width, wall_height + eps], false);
+        cube([keyboard_pcb_width + 2 * wall_width, wall_width, wall_height + eps]);
 
         /* Left */
         translate([-wall_width, -wall_width, 0])
-        cube([wall_width, keyboard_pcb_length + 2 * wall_width, wall_height + eps], false);
+        cube([wall_width, keyboard_pcb_length + 2 * wall_width, wall_height + eps]);
     }
 
     module body() {
diff --git a/case/top.scad b/case/top.scad
index 5e3d5c1..cf528ef 100644
--- a/case/top.scad
+++ b/case/top.scad
@@ -22,10 +22,10 @@ module top_case(key_switch_sizes, pcb_screw_holes) {
 
     module fascia() {
         difference() {
-            cube([case_width_bottom, case_length_bottom, wall_width], false);
+            cube([case_width_bottom, case_length_bottom, wall_width]);
 
             translate([keyboard_x_offset, keyboard_y_offset, -eps])
-            cube([keyboard_pcb_width, keyboard_pcb_length, wall_width + 2*eps], false);
+            cube([keyboard_pcb_width, keyboard_pcb_length, wall_width + 2*eps]);
         }
     }
 
@@ -34,7 +34,7 @@ module top_case(key_switch_sizes, pcb_screw_holes) {
             x = vent_x_first + (i * (vent_width + vent_width));
 
             translate([x, vent_y_offset-eps, wall_height - vent_height])
-            cube([vent_width, vent_length+2*eps, vent_height+eps], false);
+            cube([vent_width, vent_length+2*eps, vent_height+eps]);
         }
     }
 
@@ -42,15 +42,15 @@ module top_case(key_switch_sizes, pcb_screw_holes) {
         for (y = [accent_y_bottom: accent_y_stride: case_length_bottom]) {
             /* Top */
             translate([-eps, y - eps, wall_height - accent_depth])
-            cube([case_width_bottom+2*eps, accent_width + 2*eps, accent_depth+eps], false);
+            cube([case_width_bottom+2*eps, accent_width + 2*eps, accent_depth+eps]);
 
             /* Right */
             translate([case_width_bottom - accent_depth, y, -eps])
-            cube([accent_depth+eps, accent_width+eps, wall_height+2*eps], false);
+            cube([accent_depth+eps, accent_width+eps, wall_height+2*eps]);
 
             /* Left */
             translate([-eps, y, -eps])
-            cube([accent_depth+eps, accent_width, wall_height+2*eps], false);
+            cube([accent_depth+eps, accent_width, wall_height+2*eps]);
         }
     }
 
@@ -225,20 +225,20 @@ module top_case(key_switch_sizes, pcb_screw_holes) {
 
         /* Upper */
         translate([wall_width, case_length_bottom - wall_width_upper, 0])
-        cube([case_width_bottom - 2*wall_width, wall_width_upper, wall_lip_upper], false);
+        cube([case_width_bottom - 2*wall_width, wall_width_upper, wall_lip_upper]);
 
         translate([0, case_length_bottom - wall_width, wall_lip_upper - eps])
-        cube([case_width_bottom, wall_width, wall_height - wall_lip_upper + eps], false);
+        cube([case_width_bottom, wall_width, wall_height - wall_lip_upper + eps]);
 
         /* Right */
         translate([case_width_bottom - wall_width, 0, 0])
-        cube([wall_width, case_length_bottom, wall_height], false);
+        cube([wall_width, case_length_bottom, wall_height]);
 
         /* Lower */
-        cube([case_width_bottom, wall_width, wall_height], false);
+        cube([case_width_bottom, wall_width, wall_height]);
 
         /* Left */
-        cube([wall_width, case_length_bottom, wall_height], false);
+        cube([wall_width, case_length_bottom, wall_height]);
     }
 
     difference() {