summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--case/case.scad75
1 files changed, 37 insertions, 38 deletions
diff --git a/case/case.scad b/case/case.scad
index 7faa804..55f3039 100644
--- a/case/case.scad
+++ b/case/case.scad
@@ -18,8 +18,9 @@ module keyboard_base_plate(pcb_width, pcb_length) {
wall_length = pcb_length + 2 * pcb_clearance_edge;
wall_height = 14.0;
- bottom_width = 2 * (pcb_clearance_edge + thickness) + pcb_width;
- bottom_length = 2 * (pcb_clearance_edge + thickness) + pcb_length;
+ bottom_width = 2 * (pcb_clearance_edge) + pcb_width;
+ bottom_length = 2 * (pcb_clearance_edge) + pcb_length;
+ bottom_height = thickness;
screw_holes = [
[ 4.8150, 85.7250],
@@ -107,117 +108,115 @@ module keyboard_base_plate(pcb_width, pcb_length) {
}
/* Upper right corner */
- round_corner([thickness + pcb_clearance_edge + pcb_width,
+ /*round_corner([thickness + pcb_clearance_edge + pcb_width,
thickness + pcb_clearance_edge + pcb_length,
-thickness/2],
- [90, 90, 90]);
+ [90, 90, 90]);*/
/* Lower right corner */
- round_corner([ thickness + pcb_clearance_edge + pcb_width,
+ /*round_corner([ thickness + pcb_clearance_edge + pcb_width,
0 - thickness - pcb_clearance_edge,
-thickness/2],
- [180, 90, 90]);
+ [180, 90, 90]);*/
/* Lower left corner */
- round_corner([0 - thickness - pcb_clearance_edge,
+ /*round_corner([0 - thickness - pcb_clearance_edge,
0 - thickness - pcb_clearance_edge,
-thickness/2],
- [-90, 90, 90]);
+ [-90, 90, 90]);*/
/* Upper left corner */
- round_corner([0 - thickness - pcb_clearance_edge,
+ /*round_corner([0 - thickness - pcb_clearance_edge,
thickness + pcb_clearance_edge + pcb_length,
-thickness/2],
- [0, 90, 90]);
+ [0, 90, 90]);*/
/* Upper edge */
- round_edge([0 - thickness - pcb_clearance_edge,
+ /*round_edge([0 - thickness - pcb_clearance_edge,
thickness + pcb_clearance_edge + pcb_length,
-thickness/2],
[0, 90, 0],
- bottom_width);
+ bottom_width);*/
/* Right edge */
- round_edge([ thickness + pcb_clearance_edge + pcb_width,
+ /*round_edge([ thickness + pcb_clearance_edge + pcb_width,
0 - thickness - pcb_clearance_edge,
-thickness/2],
[270, 0, 0],
- bottom_length);
+ bottom_length);*/
/* Lower edge */
- round_edge([0 - thickness - pcb_clearance_edge,
+ /*round_edge([0 - thickness - pcb_clearance_edge,
0 - thickness - pcb_clearance_edge,
-thickness/2],
[90, 180, 90],
- bottom_width);
+ bottom_width);*/
/* Left edge */
- round_edge([0 - thickness - pcb_clearance_edge,
+ /*round_edge([0 - thickness - pcb_clearance_edge,
0 - thickness - pcb_clearance_edge,
-thickness/2],
[270, 90, 0],
- bottom_length);
+ bottom_length);*/
/* Upper right wall corner */
- wall_corner([thickness + pcb_clearance_edge + pcb_width,
+ /*wall_corner([thickness + pcb_clearance_edge + pcb_width,
thickness + pcb_clearance_edge + pcb_length,
-thickness/2],
[0, 0, 0],
corner_radius,
- wall_height);
+ wall_height);*/
/* Lower right wall corner */
- wall_corner([ thickness + pcb_clearance_edge + pcb_width,
+ /*wall_corner([ thickness + pcb_clearance_edge + pcb_width,
0 - thickness - pcb_clearance_edge,
-thickness/2],
[0, 0, 270],
corner_radius,
- wall_height);
+ wall_height);*/
/* Lower left wall corner */
- wall_corner([0 - thickness - pcb_clearance_edge,
+ /*wall_corner([0 - thickness - pcb_clearance_edge,
0 - thickness - pcb_clearance_edge,
-thickness/2],
[0, 0, 180],
corner_radius,
- wall_height);
+ wall_height);*/
/* Upper left wall corner */
- wall_corner([0 - thickness - pcb_clearance_edge,
+ /*wall_corner([0 - thickness - pcb_clearance_edge,
thickness + pcb_clearance_edge + pcb_length,
-thickness/2],
[0, 0, 90],
corner_radius,
- wall_height);
+ wall_height);*/
/* Upper wall */
- side([0 - thickness - pcb_clearance_edge,
- pcb_clearance_edge + pcb_length + corner_radius,
- -thickness/2],
+ side([-pcb_clearance_edge,
+ pcb_clearance_edge + pcb_length,
+ -thickness/2],
[wall_width, thickness, wall_height]);
/* Right wall */
- side([pcb_clearance_edge + pcb_width + corner_radius,
- 0 - thickness - pcb_clearance_edge,
+ side([ pcb_clearance_edge + pcb_width,
+ -pcb_clearance_edge,
-thickness/2],
[thickness, wall_length, wall_height]);
/* Lower wall */
- side([0 - thickness - pcb_clearance_edge,
- 0 - thickness - pcb_clearance_edge - corner_radius,
+ side([-pcb_clearance_edge,
+ -pcb_clearance_edge - thickness,
-thickness/2],
[wall_width, thickness, wall_height]);
/* Left wall */
- side([0 - thickness - pcb_clearance_edge - corner_radius,
- 0 - thickness - pcb_clearance_edge,
+ side([-thickness - pcb_clearance_edge,
+ -pcb_clearance_edge,
-thickness/2],
[thickness, wall_length, wall_height]);
/* Bottom plate */
- side([0 - thickness - pcb_clearance_edge,
- 0 - thickness - pcb_clearance_edge,
- 0 - thickness],
+ side([-pcb_clearance_edge, -pcb_clearance_edge, -thickness],
[bottom_width, bottom_length, thickness]);
/* Screw holes */